카본메카

탄소,흑연섬유

보론섬유

세라믹 섬유

아라미드섬유

유리섬유

Property	Units	Standard CFRP UD	Standard CFRP Fabric	E Glass Fabric	Steel	AL

Young’s Modulus 0°	Gpa	120	70	25	207	72
Young’s Modulus 90°	Gpa	10	70	25	207	72
In-plane Shear Modulus	Gpa	5	5	4	80	25
Density	g/cc	1.6	1.6	1.9	7.9	2.8
Longitudinal Modulus	Gpa	17	19.1	12.3	207	72
Transverse Modulus	Gpa	17	19.1	12.3	207	72
In Plane Shear Modulus	Gpa	33	30	11	80	25
Poisson’s Ratio		0.77	0.74	0.53
Tensile Strength	Mpa	110	120	90	990	460
Compressive Strength	Mpa	110	120	90	990	460
In Plane Shear Strength	Mpa	260	310	100
Thermal Expansion Co-ef	Strain/K	2.15 E-6	4.9 E-6	12 E-6	11 E-6	23 E-6
Moisture Co-ef	Strain/K	3.22 E-4		6.9 E-4

Note : All the information contained in these properties is believed to be reliable. It is intended for comparison purposes only as each manufactured lot will exhibitvariations. The user should evaluate the suitability of each product for their application. We cannot anticipate the variations in all end use and we make no warranties and assume no liability in connection with the use of this information. These tables are for reference / information only and are NOT a guarantee of performance 1 GPa = 1000 MPa = 1000 N/mm² = 145,000 PSI These tables relate to only 2 of the many fibre orientations possible. Most components are made using combinations of the above materials and with the fibre orientations being dictated by the performance requirements of the product.

Note :

All the information contained in these properties is believed to be reliable. It is intended for comparison purposes only as each manufactured lot will exhibitvariations.

The user should evaluate the suitability of each product for their application.

We cannot anticipate the variations in all end use and we make no warranties and assume no liability in connection with the use of this information.

These tables are for reference / information only and are NOT a guarantee of performance

1 GPa = 1000 MPa = 1000 N/mm² = 145,000 PSI These tables relate to only 2 of the many fibre orientations possible. Most components are made using

combinations of the above materials and with the fibre orientations being dictated by the performance requirements of the product.